Harley Davidson Nitrous oxide System Twin Bottle, polished, billet brackets EFI

Description

This auction is for one new DynoTune
Harley or V twin EFI Nitrous system.
This DynoTune 2 cyl Dry nitrous kit for EFI fuel injected V twin bikes, this is a show quality kit. Polished 12oz bottles, billet frame mounted brackets, braided steel lines, High pressure teflon lines etc. The kit comes with everything you need for installation. We can customize the kit as well, just email or call us. The kit is capable of adding up to an additional 80HP, stick with lower HP settings unless you have a professional install and tune your motor. This kit is the easiest way to add tire smoking, safe power increase and amazing looks, to your V Twin,  this is why DynoTune dominates the Motorcycle nitrous market.
Cold nitrous will pass the air intake temp sensor in the "Y" intake pipe. This cools the sensor and tricks the computer into turning on the electronic choke. This extra fuel mixes with the nitrous at Wide Open throttle to make more power. You can use your horn to activate the Nitrous.
The Kit contains the following:
2 show polished aluminum 12oz bottles with High flow valves
2 billet frame mounted brackets(
specify your tube dia needed in the paypal payment!,
1.25" or 1.5" where it clamps onto your frame, if you do not specify a size you will get sent the 1.25" brackets)
2 foot Bradied lines from bottles to T fitting on solenoid.
2 foot braided line from the T fitting to the solenoid.
High Flow 150HP DynoTune nitrous Oxide solenoid
Solenoid mounting brackets with hardware
2 Dry Nozzles
Teflon tubing and fittings from solenoid to intake
15HP, 30HP and 40HP jets included(you should get the bike tuned at a dyno if using over 30HP jets
Complete electrical kit with switches, wire, connectors and a complete manual showing how to wire universal horn or starter buttons as the activation switch.
Solenoid bracket
Installation instructions and tech support