Edelbrock 2701 SBC Performer EPS Aluminum Intake Small Block Chevy 305 327 350

Description

Designed to fit the 1986 and earlier 262-400 cubic-inch Chevys, Tuned for peak torque around 3500 rpm on a 350-inch engine and it produces power from off-idle to 5500 rpm, Gains of 5 hp and 9 ft/lbs. of torque over the standard manifold on a 350 Chevy are dyno-proven, IMCA Approved intake manifold, Features a 4-barrel square bore
Edelbrock 2701 Performer EPS Chevy Intake Manifold
Sku # 3252701
Mfr. Part # 2701
Condition
New
Brand
Edelbrock
Sold
Each
Details
Notes
Match with a dependable Edelbrock square-bore carburetor for maximum STREET performance gains.
Edelbrock reccommends a 500-650 CFM model.
Info
Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance over other low-rise dual plane manifolds. This small-block Chevy manifold has a runner design thats "tuned" for peak torque around 3500 rpm on a 350-inch engine and it produces power from off-idle to 5500 rpm.
Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the standard Performer manifold on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most.
IMCA racing approved.
Item Details
IMCA Approved
Specs
Port exit dimensions: 1.15" x 1.87"
Carb pad height: 4.27"
Charts
(PDF)
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
California Customers: This part has been identified as emissions sensitive and can only legally be installed on race-use only vehicles, off-road-use only vehicles, or pre-1965 vehicles in the State of California in accordance with the California Air Resource Board (CARB) requirements. Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only use such parts on these types of vehicles in California.
Specs
Material Type
Aluminum
Sold in Quantity
Each
Finish
Natural
Intake Manifold Type
Dual Plane
Carburetor Quantity
One
Carburetor Flange Type
4-Barrel Square Bore
Intake Section Included
Complete
Notes
Edelbrock reccommends a 500-650 CFM carb.
MFG. Part #
2701
RPM Range
Idle-5,500
Gaskets Included
No
EGR
No
Port Height
1.87
Port Width
1.15
Mounted Height
4.27
Fuel System Type
Carbureted
GTIN Code
085347027019
Bolt Hole Pattern
5.160" x 5.625"
Overall Height
4.27
Reviews
I would definitely buy this again
Rated
by Lester on May 15, 2021
Summary:
Great intake at a great price with fast shipping.
Yes, I recommend this product.
Great product at a low price. I would buy it again
Rated
by Daddydarkside on April 28, 2021
Summary:
Fits great on SBC 350. Just what i needed for the price
Yes, I recommend this product.
Had to buy this intake for a imca stock car!
Rated
by Mike on April 20, 2021
Summary:
Works great for imca stock car!
Yes, I recommend this product.
Fast shipping and greatest products. Recommended to everyone
Rated
by Jay on April 17, 2021
Summary:
I installed the Edelbrock Performer Aluminum Intake but that is as far as I made it so far. It might take me another month before I finish putting the rest of the engine together but it looks great and I am sure it will work outstanding when I finally get it completed
Yes, I recommend this product.
Fantastic Service!
Rated
by DTendy on March 21, 2021
Summary:
Exactly what I was was looking for!
Yes, I recommend this product.
Related Items / Suggested Parts
Edelbrock 2703 Performer EPS Chevy Intake Manifold with Oil Fill
Edelbrock 27011 Performer EPS Intake Manifold, Small Block Chevy
Edelbrock 7201 Intake Manifold Gasket Set, Small Block Chevy
Fel-Pro 1204 S/B Chevy Intake Manifold Gaskets, 1.23x1.99 Inch
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.